Table of Contents
Advertisement
TZM1612
From this moment on, each time one of the input buttons is pressed, the input corresponding
to the button pressed is switched immediately to output 12.
b) Programming of output 12 as normal output:
- Press the "MODE" button and that of output 12 at the same time. Switching off of the built-
in led of the button of output 12 indicates that function change has been performed.
c) Programming of the default configuration:
- Press the MODE button for 2 seconds. Flashing of the built-in leds indicates saving of
current machine status as configuration at power-on.
Subsequent RECALLS from keypad or computer modify the default configuration which will
correspond to the last status recalled.
Saving of 8 machine states and subsequent recall (RECALL):
Button
Mode+Input 1
Mode+Input 2
Mode+Input 3
Mode+Input 4
Mode+Input 5
Mode+Input 6
Mode+Input 7
Mode+Input 8
Mode+Output 1
Mode+Output 2
Mode+Output 3
Mode+Output 4
Mode+Output 5
Mode+Output 6
Mode+Output 7
Mode+Output 8
RECALL command are not performed "through blank"
d) Enabling / Disabling of the IR remote control:
MODE at power-one Enabling of reception from IR remote control
MODE at power-one Disabling of reception from IR remote control
When output 12 acts as PREVIEW,
the led of the OUTPUT 12(PW) button is ON.
Function
Saving of status 1
Saving of status 2
Saving of status 3
Saving of status 4
Saving of status 5
Saving of status 6
Saving of status 7
Saving of status 8
Recall status 1
Recall status 2
Recall status 3
Recall status 4
Recall status 5
Recall status 6
Recall status 7
Recall status 8
Remember that switching operations invoked by a
Via della Praia 4/a FERRIERA di BUTTIGLIERA ALTA (TO) – ITALY
16x12 RGBHV & AUDIO MATRIX
WARNING
Tel.+39 0119348778 - FAX +39 0119348779
ELPRO Video Labs s.r.l.
8
Advertisement
Table of Contents
