Panasonic TK-CJ21 Instruction Manual page 21

Once-a-Year Maintenance
●
The water flow may decrease when the filter in the main unit connection area becomes clogged with
impurities.
●
Take the following steps to clean the product once a year.
n Main unit connection area (filter, water inlet)
● The illustration of the water purifier shows an example for TK-CJ11/TK-CJ01.
1
Loosen the mounting nut, and
remove the main unit.
Remove the filter and gasket,
Then remove the gasket washer.
● Set the selector lever to "Purified"
● Gently turning the main unit will
loosen the mounting nut.
2
Clean the filter and water inlet.
3
Reinstall the water purifier.
● Don't forget to mount the filter.
● After mounting the unit, set the lever to
"Unpurified" or "Shower" and allow water to
flow for about 5 seconds.
Be sure to follow
this order
Mounting
nut
Selector lever
(Example: In case the unit is installed with an adaptor)
(Example: In case of installation using an adaptor)
Must be mounted
Note
● Do not use any tools to tighten the
mounting nut.
(Doing so may damage the mounting nut)
Filter
Gasket washer
Filter
Water
inlet
Securely tighten the nut
Clean with a
toothbrush, etc.
21