CipherLab RK25 User Manual page 40

Android Programming Guide
[in][out] A value that specifies scan angle.
SecurityLevel securityLevel
[in][out] A value that specifies decode security level, which is useful to fix some
printed quality issues when reading delda barcodes such as Code 128, Code 93,
UPC/EAN.
int timeoutBetweenSameSymbology
[in][out] A value that specifies the minimum time interval between reading two
identical barcodes. This helps prevent the scanner from accidentally reading the
same barcode twice.
This parameter applies to Continuous and Presentation modes.
int timeoutPresentationMode
[in][out] A value that specifies the time to enable the Presentation mode.
This parameter applies to Continuous mode.
TransmitCodeIDType transmitCodeIdChar
[in][out] A value that specifies whether to transmit Code ID characters.
TriggerType triggerMode
[in][out] A value that specifies the mode to scan.
Enable_State triggerPresentationModeTrigger
[in][out] A value that specifies whether users can press the trigger key to control
the scanner behaviour defined in Presentation mode.
32
ScanAngleType.Narrow Narrow Angle (35 degrees)
ScanAngleType.Wide
SecurityLevel.Zero
SecurityLevel.One
SecurityLevel.Two
SecurityLevel.Three
0 ~ 9900
*1000 (millisecond)
0 ~ 2550 *300 (millisecond) for the EX25 scan engine only
60000 ~ 1800000 *900000 (millisecond) (default: 15 minutes, ranging from
TransmitCodeIDType.None
TransmitCodeIDType.AimCodeID Transmits AIM Code ID Character
TriggerType.LevelMode
TriggerType.ContinuousMode
TriggerType.PresentationMode
TriggerType.AutoAimMode
*Wide Angle (47 degrees)
*Security Level 0 – The default. It allows the scan
engine to operate aggressively enough to decode most
"in-spec" barcodes.
Security Level 1 – Select this option if misdecodes
occur. This level should fix most misdecodes.
Security Level 2 – Select this option if Security Level 1
fails to fix misdecodes.
Security Level 3 – Select this option if Security Level 2
also fails to fix misdecodes. However, selecting this
option impairs the decoding ability of the scan engine.
If this level of security is necessary, try to improve the
barcode quality.
1 to 30 minutes)
*Transmits none
*Level mode
Continuous mode
Presentation mode
Auto Aim mode