CipherLab RK25 User Manual page 39

Enable_State.TRUE
int laserOnTime
[in][out] A value that specifies the maximum time for decoding a printed barcode
during a scan act.
500 ~ 9900 *3000 (millisecond)
InverseType negativeBarcodes
[in][out] A value that specifies the negative barcode status.
InverseType.RegularOnly
InverseType.InverseOnly
InverseType.AutoDetect
Enable_State pickListMode
[in][out] A value that specifies whether to enable picklist mode for decoding
accuracy.
Enable_State.FALSE
Enable_State.TRUE
RedundancyLevel redundancyLevel
[in][out] A value that specifies decode redundancy. Higher redundancy levels
should be selected for deteriorated barcode quality.
RedundancyLevel.
One
RedundancyLevel.
Two
RedundancyLevel.
Three
RedundancyLevel.
Four
ScanAngleType scanAngle
Enables
*Regular barcode
Negative barcode
AutoDetection
*Disables
Enables
*The following barcodes must be successfully read twice
before being decoded:
Barcode Types
Codabar
MSI
Industrial 25 (Discrete 25)
Interleaved 25
All barcodes must be successfully read twice before being
decoded.
All barcodes must be successfully read twice before being
decoded except for the following that must be read three
times:
Barcode Types "Excluded"
MSI
Industrial 25 (Discrete 25)
Interleaved 25
All barcodes must be successfully read three times before
being decoded.
Chapter 1 Barcode Reader API
Code Length
All
4 characters or less
8 characters or less
8 characters or less
Code Length
4 characters or less
8 characters or less
8 characters or less
31