Determine Installation Location - Fisher & Paykel HCB30-6 Installation Preparation

Product Dimensions
J. Distance from centre of outlet to wall
• Actual product dimensions may vary by ± 1/16" (2mm).
• Please read the entire instructions before installing the range hood.
Rangehood Width
• The range hood width is recommended to be no less than the width of the cooktop.
• A wider range hood can be used to increase the capture area if space is not restricted.
• The range hood should ideally be centered above the cooktop for proper performance.

Determine Installation Location

• To reduce the risk of fire, use only metal ductwork.
• Do not use flexible ducting.
This range hood can be installed using a wall mounting system or be suspended under cabinetry. Ducting can be
configured for both vertical and horizontal discharge. The ducting can terminate either through the roof or wall. To vent
through the wall a 90° elbow is needed.
https://producthelp.fisherpaykel.com/us/Cook/Ventilation/Wall_Canopy/HCB36-6_N/User_Guide_HCB36-6_N/04_Installation_...
Inches (mm)
6 1/4" (159)
Updated: Thu, 01 Oct 2020 16:50:17 GMT
Powered by
5