Table of Contents
Advertisement
6.3 Notes
6.3.1 Changing patty shape
To change the shape of the patties, first disassemble the machine as shown in point "7 CLEANING".
Once the machine has been disassembled, you can change the shape of the patties and reassemble
the machine by reversing the order of disassembly.
Remember that when you change the shape, the weight might vary.
6.3.2 Paper dispenser
To place paper on the patties, fit the paper dispenser (Pos. 5, overview). First, insert the shaft. Next,
insert the guide into the former shaft keeping it as horizontal as possible.
Image 7, Inserting axle
Insert the paper discs so that the waxed side faces downwards in the dispenser, as this is the side that
will be in contact with the mixture.
Image 8, Inserting guide
-11-
Advertisement
Table of Contents
