Split Display; Dual Imaging; Quad Imaging - EDAN Acclarix AX8 User Manual

Acclarix AX8/Acclarix AX7 Diagnostic Ultrasound System User Manual
Deleting a body mark:
There are two ways of deleting a body mark graphic:

Press Delete on the touch screen to delete the graphics on the image area.

Press the <Clear> hard key to delete all body marks, comments, and measurements.

7.3 Split Display

7.3.1. Dual Imaging

Dual Imaging displays images side by side on the screen. During real-time imaging when Dual
imaging is enabled, the active image is displayed in real-time and the other image is frozen.
Dual image display is invoked by pressing Dual button on the B-mode touch screen. Each single
press of Dual function during real-time imaging activates the image on one side and the image on
other side becomes frozen. With both images frozen, each single press of Dual function toggles
between two images, but does not change the frozen status of the system.
In Dual mode, press Single button on the touch screen to display the currently active side of image as
a single image.
Dual Exit
Dual is exited by any of the following:

Pressing the Quad button.

Pressing the B, M, D hard key.

Pressing the 3D, 4D button.

Transducer change, preset recall, or new exam.
Color Doppler is available during dual imaging.

7.3.2. Quad Imaging

Quad Imaging displays images in four quadrants on the screen. During real-time imaging when Quad
imaging is enabled, the active image is displayed in real-time and other images are frozen.
Quad imaging is invoked by pressing Quad button on the B-mode touch screen. Quad button is a
one-shot button. Each single press on it during real-time imaging activates one of the four images in
the following order: from top left image to top right image, then to bottom left image and bottom right
image. Each single press on it during frozen status switches among the four images in an order
described above. but does not change the frozen status of the system.
Quad Exit
Quad is exited by any of the following:

Pressing the B, M, D hard key.

Pressing the Dual button.

Pressing the 3D, 4D button.

Transducer change, preset recall, or new exam.
Color Doppler is available during Quad imaging.
- 86 -
Features