User administration
You can manage users from this page. Up to 5 users
can be logged.
Creating users
1. Tap an empty "Name" field.
The "Enter password" window is displayed.
2. Using the numeric keypad, enter the password.
Confirm with "OK".
The "Change user" window is displayed.
Changing a user or password
1. Tap the name or password field you wish to
change.
The "Enter password" prompt is displayed.
2. If you have entered the correct password: Change
the name or password by tapping the appropriate
field.
Diagrams
You can have up to 4 parameters (actual and set val-
ues) displayed in a diagram.
The values in a 30 minute ring buffer are recorded
■
every 10 seconds.
■
The values in a 60 minute ring buffer are recorded
every 20 seconds.
Opening diagrams
Tap the following on-screen buttons:
1. "Menu"
2.
"Diagrams"
3. Select one of the following diagrams to display. To
do so, tap one of the diagram symbols.
■
Water
■
Fuel
■
Flue gas fan
Oxygen
■
Flame
■
Note
The diagrams can also be opened from the subsection
pages for the boiler.
In the default display, tap on a subsection button.
■
The corresponding subsection page opens.
■
Tap the display on the left to open the diagram.
(cont.)
3. Enter the name via the keypad and the password
via the numeric keypad.
Confirm with "Enter" or terminate the entry with
"Esc".
4. Save the changes with "OK" or terminate the entry
with "Cancel".
3. Save the changes with "OK" or terminate the entry
with "Cancel".
Display in the "Diagram" field
Top display field
■
Overview of displayed variables
Shows the values for the current cursor position.
Centre display field
Diagram with the selected variables
■
Tap the display field to zoom in or zoom out on the
time axis.
Further settings
21