Change The Band; Remove A Band; Attach A New Band - Fitbit Zip Charge 3 User Manual

Change the band

Charge 3 comes with a small band attached and an additional large, bottom band in
the box. Both the top and bottom bands can be swapped with accessory bands,
sold separately on fitbit.com. For band measurements, see

Remove a band

1. Turn over Charge 3 and find the band latches.
2. To release the latch, press down on the flat button on the band.
3. Gently pull the band away from the tracker to release it.
4. Repeat on the other side.

Attach a new band

To attach a new band, press it into the end of the tracker until you feel it snap into
place.
"Band size" on page 48.
13