Table of Contents
Advertisement
Change the band
FB422 comes with a small band attached and an additional large, bottom band in the box. Both the
top and bottom bands can be swapped with accessory bands, sold separately on fitbit.com. For
band measurements, see "Band size" on page 35. Charge 3 bands are compatible with FB422.
Remove a band
1. Turn over FB422 and find the band latches.
2. To release the latch, press the latch outward toward the band.
3. Gently pull the band away from the tracker to release it.
4. Repeat on the other side.
Attach a new band
To attach a new band, press it into the end of the tracker until you feel it snap into place and see the
latch close into the locked position against the device body.
If you have trouble attaching the band or if it feels loose, gently move the band back and forth to
make sure it's attached to the tracker.
©2020 Fitbit, Inc. All rights reserved. Fitbit and the Fitbit logo are trademarks or registered
trademarks of Fitbit in the US and other countries. A more complete list of Fitbit trademarks can be
found at http://www.fitbit.com/legal/trademark-list. Third-party trademarks mentioned are the
property of their respective owners.
Advertisement
Table of Contents
