Operation; Atys D10 Display - socomec ATyS D10 Instruction Manual

4. Operation

4.1. ATyS D10 display

The ATyS D10 allows remote display of the transfer switch: positions, source availability and operational modes.
Programming and operation remains available directly on the master product ATyS C30, ATyS M6e, ATyS d, ATyS t
and ATyS g
(Compatible with the old ATyS range 6e and ATyS 6m).
Source 1 available
Transfer switch in
position I
Transfer switch
in automatic mode
ATYS D10 / D20 - 542359B - SOCOMEC
Power on
Transfer switch in
position 0
• ATyS product fault, non-conform
switching
• Possible to reset after fault is cleared .
Switch off the power supplies of the
master product for 3 minutes .
Source II available
Transfer switch in
position II
EN 5