Advertisement
Available languages
Available languages
Installation Guide
2. Connect terminals 14 and 16 to an
ohmmeter
.
3. Turn screw
until the cam
the end switch
and the ohmmeter
shows 0 Ω.
The end switches are adjusted.
Dismounting of Valve and
Actuator
11
DANGER!
Danger of injury by steam or hot water!
Valve without actuator is open
is in the actuator.
It is absolutely necessary to depressurize
system prior to dismounting.
Carry out dismounting in reverse order as
mounting.
6
DEN-SMT/SI
AMV 410, AMV 413
switches
, sealing
VI.AA.U4.7S
Danfoss Heating
Advertisement
