Miele KM 6113 Operating And Installation Instructions page 49

Problem
 lights up in the rear
left cooking zone dis-
play,  lights up in the
rear right cooking zone
display and numbers
light up in the front dis-
plays.
Cause and remedy
left , right  or , or , or 
A calibration fault has occurred after the reset func-
tion has been activated or after an interruption to the
power supply.
 If the displays do not go out after 5 minutes, pro-
ceed as described under "The sensors show in-
creased sensitivity or fail to react".
left , right 
left , right 
The overheating mechanism has triggered.
 See "Overheating protection".
left , right  or 
The fan is blocked or faulty.
 Make sure it has not been blocked by something
like a fork. Remove the cause of the blockage.
 If this fault code continues to appear in the dis-
play, contact Miele Service.
 and other numbers
There is a fault in the electronic module.
 Interrupt the power supply to the hob for approx. 1
minute.
 If the problem persists after power has been re-
stored, please contact Miele.
Problem solving guide
49