Installation Notes - Miele KM 6113 Operating And Installation Instructions

Installation notes

Seal between the hob and the
worktop
Do not use sealant between the hob
and the worktop. This could result in
damage to the hob or the worktop if
the hob ever needs to be removed
for servicing.
The sealing strip under the edge of
the top part of the appliance
provides a sufficient seal for the
worktop.
56
Tiled worktop
Grout lines  and the hatched area un-
derneath the hob frame must be
smooth and even. If they are not the
hob will not sit flush with the worktop
and the sealing strip underneath the
hob will not provide a good seal
between the hob and the worktop.
Sealing strip
Dismantling the hob for service pur-
poses may damage the sealing strip
underneath the edge of the hob.
Always replace the sealing strip be-
fore reinstalling the hob.