Table of Contents
Advertisement
Intel NM70-ITX series Motherboard
q Device reset time-out
Allows you to set device reset time-out.
q Device power-up delay
Allows you to set device power-up delay.
Super IO Configuration
The items in this menu allow you to configure NCT5577D Super IO Chipset.
q Serial Port 0/1 Configuration
Allows you to set parameters of Serial Port 0/1 (C0MA).
q Parallel Port Configuration
Allows you to set parallel port (LPT/LPTE).
Power Management Features
The items in this menu allow you to control the system power management. Press
<Enter> to display the configuration options:
q Deep S5
When enabled, wake up from S5 can only be done by power button.
q Restore AC Power Loss
This item allows you to configure how the system board responds to a power
failure.
q Wake Up by USB KB/Mouse from S3
Enable or disable wake up by USB/PS2 KB/Mouse from S3.
q Wake Up by PS2 KB/Mouse from S3/S4/S5
Enable or disable wake up by PS2 KB/Mouse from S3/S4/S5.
q Wake Up on Alarm
Enable or disable wake up on alarm.
q Wake Up by PCIE Device from S3/S4/S5
Enable or disable wake up by PCIE device from S3/S4/S5.
Display Configuration
The items in this menu allow you to set display Configuration.
q Aperture Size
This item allows you to set the aperture size, options: 64MB/128MB/256MB.
q DVMT Pre-Allocated
This item allows you to set DVMT pre-allocated size.
q DVMT Total Gfx Mem
This item allows you to set DVMT total Gfx mem size.
OnBoard Device Configuration
The items allow you to configure onboard device, including HD Audio, LAN and so on.
q LAN1/2 Controller
Enable or disable onboard LAN1/2 controller.
20
Advertisement
Table of Contents
