Advertisement
STEPS FOR ASM OFFICE • MODELS 76112 & 76113
M
4
M
3
Install M
onto M
, then slide both parts
3
4
onto the thumbturn.
STEPS FOR ASM/ESM STOREROOM • MODELS 76112, 76113, 76131
M
4
M
2
M
1
Install M
onto M
, then slide both parts
2
4
onto the thumbturn.
The thumbturn should be locked in the
vertical position.
PK2990/08/12 - GENERATION E-760 INSTALLATION INSTRUCTIONS
DO THE FOLLOWING
TRIM ASSEMBLY ON THE DOOR:
Install only parts (M
inside trim assembly.
DO THE FOLLOWING
TRIM ASSEMBLY ON THE DOOR:
Put the thumbturn in the vertical position and install
only parts (M2 and M4) as shown, on the inside trim
assembly. The notch on the stopper cam (M2) must
engage the tab on the plate (M4), so that the thumbturn
is locked in the vertical position.
Technical Support
Call 1-877-468-3555
or 1-514-340-9025
BEFORE
PLACING THE INSIDE
and M
) as shown, on the
3
4
BEFORE
PLACING THE INSIDE
Advertisement
