Adjusting Program Schedules; Overriding Schedules Temporarily; Overriding Schedules Permanently - Honeywell Home Smart Series User Manual

Adjusting program schedules

Set Clock/Day/Schedule, then
1 Press
2 Press or
s t
Wake time, then press Next.
3 Press or
s t
period, then press Next.
4 Set time and temperature for the next time
period (Leave). Repeat Steps 2 and 3 for each
time period.
5 Press Next to set time periods for the next day.
Repeat Steps 2 through 4 for each day.
6 Press Done to save and exit.
Note: Make sure the thermostat is set to the
system mode you want to program (Heat or
Cool).

Overriding schedules temporarily

Press or to immediately adjust the
s t
temperature.
The new temperature will be maintained
only until the next programmed time period
begins.
To cancel the temporary setting at any time,
press Cancel. The program schedule will
resume.

Overriding schedules permanently

HOLD
1 Press to permanently adjust
the temperature. This will turn off the
program schedule.
2 Press or
s t
setting. The temperature you set will
be maintained 24 hours a day until you
manually change it or press
resume the program schedule
to set your Monday (Mon)
to set the temperature for this
to adjust the temperature
Cancel
Set Schedule.
to
MCR33892
HOLD
MCR33896
HOLD
MCR33897