Installing Your Thermostat - Honeywell Home Smart Series User Manual

Setting up your thermostat
Setting up your programmable thermostat is easy. It is preprogrammed and ready to go
as soon as it is installed and registered.
1
Install your thermostat.
Connect your home Wi-Fi network.
2
3
Register online for remote access.
Before you begin,
Use the QR Code

Installing your thermostat

You might need the following tools to install this thermostat:
• No. 2 Phillips screwdriver
• Small pocket screwdriver
• Pencil
• Level (optional)
1 Switch OFF power to your
heating/cooling system.
Important! To protect your
equipment, switch OFF the power to
your heating/cooling system at the
breaker box or the system switch.
you may want to watch a brief installation video.
at the front of this guide.
®
• Drill and bits (3/16" for drywall,
7/32" for plaster) (optional)
• Hammer (optional)
• Electrical tape (optional)
Circuit breaker
box
or
Heating/cooling
M31535
system power
switch