Riello - Slant/Fin EUTECTIC EC-10DV Series Installation And Operating Instructions Manual

12

Riello

Burner
Model
Boiler Model
EC-13DV BF-3
EC-14DV BF-3
EC-15DV BF-5
EC-16DV BF-5
Models BF-3 & BF-5 Electrode Setting
Figure 4.
Turbulator location
Picture 1.
TURBULATOR SETTING
1. Loosen nut, 1, then turn the screw, 2, until the index marker, 3, is aligned with the correct index number.
2. Retighten the retaining nut, 1.
The numbers on the casting are there to denote the high and low end of the scale – For Model BF-5, zero and four are
scale indicators only. From left to right, the first line is 4 and the last line is 0.
The air/oil ratio depends on accurate setting of the turbulator disc and air damper.
Be careful when making this adjustment as an incorrect setting will result in an unsatisfactory operation.
See figure 5 & 6.
RIELLO BURNER DATA
Firing
Blast Rate Size
Tube GPH (GPH)
Long 0.65 0.55
Long 0.8 0.7
Short 1 0.75
Short 1.15 0.85
3
2
1
Nozzles
Angle & Oil Pump
Type Mfg. (PSIG)
80*A Delavan 133
80*B Delavan 130
60*A Delavan 178
60*W Delavan 182
EUTECTIC EC-10 DV
Approx. Boiler
Approx.
Head Flue
Air
Setting Baffle
Setting
0 4.5 2
3 5.5 none
1 4.4 none
2 4.2 none
Burner
Insertion
Depth
7"
7"
4-1/4"
4-1/4"