Advantech ARK-2250R User Manual page 26

3.2.2.3 AMT Configuration
Feature
Intel AMT
BIOS Hotkey Pressed
MEBx Selection
Screen
Hide Un-Configure
ME Confirmation
Prompt
MEBx Debug Mes-
sage Output
Un-Configure ME
AMT Wait Timer
ASF
Activate Remote
Assistance Process
USB Provisioning of
AMT
ARK-2250R User Manual
Option Description
Enable/Disable Intel® Active Management
Technology
Disable BIOS Extension. Note: iAMT H/W is always
Enable enabled. This option just controls the BIOS
extension execution. If enabled, this requires
additional firmware in the SPI device.
Enable/Disable BIOS hotkey press. Enable
Disable
this feature will show hotkey prompt at boot-
Enable
ing up screen
Enable/Disable MEBx selection screen at
Disable booting up.
Enable This feature allows to enter ME configuration
screens OR initiate a remote connection.
Disable Hide Un-Configure ME without password
Enable Confirmation Prompt
Disable Enable MEBx debug message output. This
Enable feature is for debug purpose only.
Disable Use this item to enable/disable un-configure
Enable ME without password.
Set timer to wait before sending
0 ~ 65535
ASF_GET_BOOT_OPTOINS
Disable Use this item to enable/disable Alert Specifi-
Enable cation Format.
Disable Use this item to enable/disable trigger CIRA
Enable (Client Initiated Remote Access) boot.
Disable
Enable/Disable of AMT USB Provisioning
Enable
16