Automatic Cooling/Heating Display Setting - Mitsubishi Electric PAR-21MAA Manual

4.4.3 Automatic Cooling/Heating Display Setting

• This section explains how to set whether to display "COOL"/"HEAT" in auto mode. It will not be displayed if auto mode is set to
OFF.
1 ON (default) : One of "Automatic cooling" and "Automatic heating" is displayed under the automatic mode is displayed.
2 OFF : Only "Automatic" is displayed under the automatic mode.
Selecting Whether to Display "COOL"/"HEAT" in Auto Mode
(1) While pressing the
MODE
selection mode.
(2) Press the button until
MODE
CHANGE
[Display A]
LANGUAGE
(3) Press the
MENU
(4) Press the
ON/OFF
[Display D]
(5) While pressing the
MODE
* If you press the
ON/OFF
I Display example when "AUTO MODE DISP C/H" is set to "ON"
[During auto (cool) mode]
I Display example when "AUTO MODE DISP C/H" is set to "OFF"
40
I Display example
A
D
(1) (5)
(2)
(3)
(4)
button, press the
DISP MODE
appears on the screen (at A).
SETTING
FUNCTION
SELECTION
button so that "AUTO MODE DISP C/H" appears on the screen (at A).
button to select "on" or "oFF" on the screen (at D).
button, press the
button before the
button for two seconds to activate the remote controller's function
ON/OFF
MODE
SELECTION
button for two seconds to return to normal mode.
ON/OFF
button, the settings you have made will be cancelled.
MODE
[During auto (heat) mode]
DISP MODE
SETTING