Mitsubishi Electric PAR-21MAA Manual page 19

G Screen display when auto mode is set to ON
(1) Press the
ON/OFF
The ON lamp lights up and operating contents are displayed on the LCD.
(2) Press the button.
MODE
Each time the
MODE
COOL DRY
*1: If your air conditioner is designed for cool operation only, "AUTO" and "HEAT" will not be displayed, nor will it be possible to
select them.
I Display example when auto mode is set to ON
G Screen display when auto mode is set to OFF
(1) Press the
ON/OFF
The ON lamp lights up and operating contents are displayed on the LCD.
(2) Press the button.
MODE
Each time the
MODE
COOL DRY
*1: If your air conditioner is designed for cool operation only, "HEAT" will not be displayed.
button.
button is pressed, the operation mode switches from one to another. "AUTO" is also displayed.
FAN HEAT
*
If AUTO MODE DISP C/H is ON (see 4.4.3), it takes about 10 seconds before the display
is switched from one mode to another.
button.
button is pressed, the operation mode switches from one to another, but "AUTO" is not displayed.
FAN HEAT
*1
AUTO
*1
19