Woods BATWING BW20.50Q Operator's Manual page 54

REF PART QTY
A 1019456 - Winch kit, complete
1 52478 4 Idler bracket
2 6696 2 Chain idler casting
3 409 2 Clevis pin, 1/2 x 2
4 22411 2 Klik pin, 3/16 x 1
5 3379 * - HHCS, 1/2 NC x 1-1/2 GR5
6 11900 * - Lock nut, 1/2 NC flanged
7 1863 * - Washer, 1" SAE flat
8 1008325 2 Headless pin, 1 x 4 drilled
9 1266 * - Cotter pin, 3/16 x 1-1/2
10 1027150 2 Channel. .25 x 2.56 x 2.75 x 38.48
11 1027199 1 Channel, 3.12 x 3.25 x 10.00
12 12612 1 Gear winch 5.1 to 1
13 12642 1 Winch cable clamp kit
14 11790 1 C-Hook, 1/4 cable
15 52479 1 Cable, 1/4" x 24-ft
16 11789 2 Clip, 1/4 cable
17 839 * - HHCS, 3/8 NC x 1 GR5
18 565 * - Washer, 3/8 flat
19 838 * - Washer, 3/8 lock
20 835 * - Hex nut, 3/8 NC plated
* Standard hardware; obtain locally
54 Common Components
WINCH KIT (OPTIONAL)
DESCRIPTION
Winch Kit Operation
1. Move cutter so wing is on the up slope of a ditch
to aid in wing lift with the winch.
2. Unwind cable and remove roller (2).
3. Place cable around roller (2) and reinstall using
pin (3) and klik pin (4).
4. Attach cable hook into large hole in winch
assembly bracket (11) and raise wing.
5. Install transport lock pin before moving unit.
MAN1281 (4/15/2019)