Condenser Fan Motor - Scotsman UC2024 Series Service Manual

UC2024 and UC2724 Service Manual

Condenser Fan Motor

The condenser fan motor only operates when the fan
pressure control closes to connect power to it. Before
changing a fan that does not turn, check for power to
it first.
To replace:
1. Disconnect electrical power to the unit.
2. Remove the front and left side panels.
3. Disconnect the quick connect to the fan motor.
4. Use a long screwdriver and the slots on the side
to remove the hard to reach screws holding the
plastic venturi to the condenser shroud.
5. Pull the fan motor and venturi out and remove the
fan motor and assembly from the unit.
Note: The fan motor is only available with the blade
and venturi.
Electrical Shock Hazard
Disconnect electrical
power before beginning
Use holes in left side to access the
two screws in the back of the motor.
November 2019
Page 32