Removal And Replacement - Scotsman UC2024 Series Service Manual

UC2024 and UC2724 Service Manual

Removal and Replacement

Access to many components will require removal of
the back panel.
Water Pump
1. Disconnect electrical power.
2. Drain the water system.
3. Remove the upper back panel.
4. Pull the inlet and outlet hoses from the water
pump.
5. Twist the pump out of its rubber mount.
6. Disconnect the wires from the pump and remove
the pump from the unit.
Electrical Shock Hazard
Disconnect electrical
power before beginning
November 2019
Inlet Water Solenoid Valve
1. Disconnect electrical power
2. Shut off the water supply to the unit
3. Remove the upper back panel
4. Disconnect water inlet from valve.
5. Disconnect water outlet from valve.
6. Remove two screws holding valve to unit.
7. Disconnect electrical wires from valve and remove
valve from unit.
Page 29
Electrical Shock Hazard
Disconnect electrical
power before beginning