Table of Contents
Advertisement
mount the unit to the bottom of the dashboard. BE SURE TO SECURE EVERY
HOLE WITH A SCREW.
3. The original wires on the ashtray will hookup, as they were before you added the
a/c. (if the ashtray is present in the Jeep) The lighter may have to go on the other
side of the unit (passenger side).
4. Attach the steel "L" shaped bracket to the firewall to support the unit. This
bracket secures the unit from hitting the gas pedal.
5. The bracket is going to sit next to the gas pedal, about one inch to the right of it as
seen in the picture.
Figure 2.3
Advertisement
Table of Contents
