1. Disconnect the Negative cable first and then Positive Battery Cable.
2. Remove the Ashtray from underneath the dashboard. Slide the ashtray out of the
holder in order to remove all the screws.
3. Leave all the wires going to the ashtray connected if possible, or disconnect and
reconnect after the installation.
Installing the Evaporator
1. Attach the Ashtray to the unit, using the three holes on the bottom side of the unit.
2. Place the evaporator inside the vehicle. Locate the mounting holes on the bottom
of the dashboard. After locating all the holes use the self-tapping screws to
Step One
Step Two
Mounting
holes for
the ashtray.