Table of Contents
Advertisement
13. We recommend attaching the hoses to the condenser before reinstalling the
radiator.
14. Once the hoses are attached reinstall the Radiator, and shroud
15. Fill the Radiator with the antifreeze and water. You may have to run the Jeep in
order to fill the radiator to its full capacity.
Installing the compressor mount and compressor
1. This kit is designed to work with many different engine combinations; Please use
the directions supplied with the mount kit to install the mount, compressor and
belt.
2. The compressor can be mounted with the fittings on the side or straight up.
3. The compressor (if purchased with the kit) will be full of oil. DO NOT ADD OIL
TO THE SYSTEM.
Step Five
Advertisement
Table of Contents
