Mono Channel Eq Section; Stereo Channel Inputs; Balance & Level - Wharfedale Pro EZ-M mini-mixer 10X2 Owner's Manual

Stereo Channel Inputs

Each of the stereo channels on the EZ-m 10x2
(2/3 and 4/5) feature two line level inputs with ¼"
Tip/Ring/Sleeve (TRS) jacks for both balanced
and unbalanced left and right input signals.
These inputs can accommodate both stereo and
mono inputs. When using a mono source,
connect the cable to the LEFT (MONO) input
only. Stereo Channels 2 /3, 4/5 have two inputs
with left and right ¼" Tip/Ring/Sleeve (TRS)
input jacks.
LEFT (MONO) input: When only one plug is
inserted into the LEFT jack, the channel
operates as a mono channel.
BALANCE and LEVEL
BALANCE Control
8
On a stereo channel, with a stereo input
connected, turning the BALANCE control to the
left will cause the right input's signal level to
decrease. Turning the BALANCE control fully
right on a stereo channel will cause the left
input's signal level to decrease. If a mono input
is connected to a stereo channel, the BALANCE
control will function as a PAN control by
adjusting the left/right balance of the mono
signal being sent to the left and right MAIN MIX
outputs.
Stereo Channel Level Control
9
The stereo channel level control knob
allows for volume control of both the left and
right signals being sent to the MAIN MIX master
volume control. If a mono input is connected to
a stereo channel, the channel functions like a
mono channel.
6
8
9