Pmx 500 Master Section; Pmx 500 Rear Panel - Wharfedale Pro PMX 500 Operating Manual And User Manual

PMX 500 MASTER SECTION


4
6
7
8
9
7. FX to Mix - Controls the output level of the internal FX processor to the master buss
8. 7-band EQ - Master section EQ to fine tune the overall sound
9. Rec Out - Line level output using phono connectors, provides connection to recording devices
0. Mix Level - Controls the main master volume
. Mix output - Balanced / unbalanced ¼" TRS master output

PMX 500 REAR PANEL

. FX Select - Selects the effect type that
2. Power LED - Indicates AC supply
3. Phantom Power LED - Indicates +48v
2
3
5
4. FX Send - Allows for master adjustment
5. Master Level LED's - 4 segment LED
0

6. Bypass - Used to switch the internal FX
. Speakon™ outputs - Parallel outputs for connection to
your loudspeakers

PLEASE MAKE SURE THAT THE TOTAL
IMPEDANCE OF THE LOAD IS NOT LESS
THAN 4 OHMS.
2
2. Power Switch - Turns the unit on or off, ensure that AC
is supplied and that the levels have been turned down
3
to protect your speakers
3. Phantom Power switch - Activates the +48v phantom
4 powering for the 4 XLR inputs
4. IEC receptacle - Allows input of the supplied IEC lead
for AC supply
will be used
phantom powering is supplied to all of
the XLR inputs. Please check that all
connected microphones can withstand
+48v power input
of the FX send buss
metering for the master buss, if the
limit LED illuminates constantly lower
the master level to avoid damage to
your loudspeakers
processor on or off
PMX
Powered Mixer
7