Tesla WT8C90M User Manual page 6

ENG
After Drying
Buzzer beep or "0:00"on display.
Open the door and
take out laundry
NOTE
• If use the socket with a switch, please press the switch to turn off the power directly.
Before Each Drying
ATTENTION!
Before the first cycle, the dust and grease may remain in this dryer during the
period of manufacture and transportation, to avoid contaminating your clothes, please follow these steps:
• Put some clean rags into the drum.
• Plug the power.
• Select the "Quick" Program, press "Start/Pause" button.
• After finishing this program, please follow the "Cleaning and Care" to clean the lint filter and air condenser
on page 19.
1. Before drying, thoroughly spin the laundry in washing machine. High spin speed can reduce the drying
time and save energy consumption.
2. For uniform drying result, sort the laundry according to fabric type and drying program.
3. Before drying, please close zips, hooks and eyelets, button up, tie fabric belts, etc.
4. Do not over dry the clothes, because over dried clothes can easily get creases.
5. Do not dry the articles containing rubber or similar elastic materials.
6. The door can be opened only after the program of the drying machine finishes to prevent human skin
from being scalded by hot steam or over heated drying machine.
7. Clean the lint filter and empty container after each use to avoid extension of drying time and energy
consumption.
8. Do not dry these clothes after dry-clean process.
The reference weight of dry clothes (each).
Mixed-fabric clothes
(about 800g)
Single bedsheet
(about 600g cotton)
Short sleeve shirt
(about 180g cotton)
1 2
Pull out the
container
Jacket
(about 800g cotton)
Work clothes
(about 1120g)
Short pants
(about 70g cotton)
3
Pour out Clean the filter
condensate water
Jeans
(about 800g)
Sleepwear
(about 200g)
Socks
(about 50g mixed-weave)
6
4 5
Power off
Towel quilt
(about 900g cotton)
Long sleeve shirt
(about 300g cotton)