Table of Contents
Advertisement
Manual – Starflow QSD Model 6527B and 6537A
6.4.2 TOOLS – Firmware Update
The last option in the "Tools" menu is the "Firmware Update" selection.
This allows the QSD Instrument to have its internal firmware updated when new firmware releases
are made available. Please note that the Unidata 6603W FTDI programming cable is required in this
process.
Once the firmware update selection is made, a file window will open and the firmware selection file
can take place. New firmware files may be sent to Starflow QSD users by the Unidata Support Team
or alternatively, made available through the Unidata web site at
https://www.unidata.com.au/
Once the correct file has been selected the software will automatically send the new firmware file
down to the instrument. Correct operation should then be confirmed. All old settings are saved and
then restored after the instrument has been successfully upgraded.
The Sonic software will report the process as being successful.
Unidata Manual - 6527B and 6537A Starflow QSD User Manual 17 01 2020.docx
Page 29
Advertisement
Table of Contents
