UniData Communication Systems Starflow QSD Manual page 22

Manual – Starflow QSD Model 6527B and 6537A
This screen indicates that the "Sonic" software has successfully communicated with the QSD
Instrument. You will see the comm port number shown on the lower left hand side of the screen.
If you don't get this screen and the software returns an error it may mean that the Device Driver for
the interface cable did not install correctly. Navigate to the computer "Device Manager" page and
check the status of the device driver.
Click on the Green banner and it will turn red indicating the
QSD Instrument is getting ready to send the first lot of data to the software. The time should start
incrementing every five seconds and the data will change accordingly.
NOTE. Depending on the model of Starflow QSD will depend on what parameters you will see in this
dispay.
Unidata Manual - 6527B and 6537A Starflow QSD User Manual 17 01 2020.docx Page 20