L-Acoustics A10i Owner's Manual page 91

Mounting an A10i Wide/Focus assembly with A10i-TILTBRACKET
Procedure
1. Secure A10i-TILTBRACKET to the ceiling using M10 screws.
Fasteners for wall-mounting or ceiling-mounting
Select screw length and anchors applicable to the wall or ceiling properties.
646 mm / 25.5 in
2. Prepare an enclosure by removing the placeholder screws and securing end rigging plates on both sides.
3. Secure the front of the enclosure to Ai-FIXBRACKET.
A10i owner's manual (EN) version 1.0
Rigging procedures
91