Table of Contents
Advertisement
1.5 Handling, location and positioning
The product should be transported carefully as
shown, with packaging. Use the handles in the
box.
!
Tappings, valves etc. should not be used to lift
the product as this could cause malfunction.
!
The cylinder must be installed complying with current building regulations.
!
The product should be placed in a dry and permanently frost-free position.
The product should be placed on a floor or wall suitable for the total weight of the prod-
!
uct when in operation. See type plate.
The product must have a clearance for servicing of 40 cm in front of the cover / 15 cm
!
above the top of the product.
!
The product should be easily accessible in the home for servicing and maintenance.
1.6 Clearances
400 mm
CAUTION
Min.
CAUTION
!
Min. 400 mm
Min. 150 mm
5
Advertisement
Table of Contents
