Raisecom
ISCOM5508-GP (A) Hardware Description
Usage
Connect the ISCOM5508-
GP to the ODF through the
PON interface.
3.1.2 Connector
Fiber connectors are different in shape, ferrule end-face, and pigtail sheath color, as shown in
Table 3-2.
Table 3-2 Fiber connectors
LC/PC
SC/PC
FC/PC
SC/APC
LC/UPC
LC/APC
LC/PC fiber connector
Figure 3-1 shows the appearance of the LC/PC fiber connector.
Local
connector
SC/PC
SC/PC
SC/PC
Choose the connector type and jumper cable length reasonably based on the on-
site requirements.
The supported connector of the optical interface depends on the optical module.
Choose a connector suitable for the optical interface. Otherwise, it may increase
additional loss of fiber links, reduce transmission quality of services, or even
damage the connector and optical interface.
Connector
Clamping square fiber connector/Micro-convex
grinding-and-polishing ferrule end-face
Square fiber connector/Micro-convex grinding-
and-polishing ferrule end-face
Round screw-thread connector/Micro-convex
grinding-and-polishing ferrule end-face
Square fiber connector/8 degree micro-convex
grinding-and-polishing ferrule end-face
Clamping square fiber connector/Curved
grinding-and-polishing ferrule end-face
Clamping square fiber connector/8 degree
micro-convex grinding-and-polishing ferrule
end-face
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Remote
connector
LC/PC
2 mm single-mode fiber
FC/PC
2 mm single-mode fiber
SC/PC
2 mm single-mode fiber
Description
3 2BFiber and cables
Type
Standard
Pigtail sheath color
Blue
Blue
Blue
Green
Blue
Green
24