Ac Power Module (Rpa1101-Si-220S12); Introduction; Panel And Slots - Raisecom ISCOM5508-GP Hardware Description

Table of Contents

Advertisement

Raisecom
ISCOM5508-GP (A) Hardware Description
Specification
Storage Temperature
Humidity
Power consumption for 20dBm/port
MTBF @+65 ℃
Dimension(W x L x H )
Number of CATV signal inputs/outputs

2.6 AC power module (RPA1101-SI-220S12)

2.6.1 Introduction

The RPA1101-SI-220S12 (hereinafter referred to as RPA1101) module is an AC power
module of the ISCOM5508-GP. It supports the following features:

2.6.2 Panel and slots

The RPA1101 power module can be only inserted into slot 4 or slot 5.
Figure 2-12 shows the panel of the RPA1101 power module.
Minimum
-20
5
15
129.4×243.4×19.8
Input: 1 / Output: 4
Wide voltage input: 100–240 VAC
Rated output voltage: 12 V; rated output current: 8.3 A
Output overvoltage and overcurrent protection
Input surge current and voltage suppression
Power status LED
Operating temperature: -10 to +70°C
Turn off the power switch or disconnect the power connection before installing or
removing the power cable.
Ensure that the label on the power cable is correct before connecting the power
cable.
Use the power cable compliant with required specifications.
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
Typical
value
value
Maximum
Unit
value
80
95
%RH
20
W
Years
mm
2 1BComponents
Description
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iscom5508-gp a

Table of Contents