Omron ES1 N Series Manual page 8

Precautions for Safe Use
Be sure to observe the following precautions to prevent operation
failure, malfunction, or adverse affects on the performance and
functions of the product. Not doing so may occasionally result in
unexpected events. Do not handle the product in way that exceed the
ratings.
1. The product is designed for indoor use only. Do not use the
product outdoors. Do not use or store the product in any of the
following locations.
• Places directly subject to heat radiated from heating equipment.
• Places subject to splashing liquid or oil atmosphere.
• Places subject to direct sunlight.
• Places subject to intense temperature change.
• Places subject to icing and condensation.
• Places subject to vibration and large shocks.
• Places subject to dust or corrosive gas (in particular, sulfide gas
and ammonia gas).
2. Use and store the Infrared Thermosensor within the rated ambient
temperature and humidity. Provide forced-cooling if required.
3. Check the signal names and polarities of terminals such as those
of the temperature controller, and wire correctly.
4. Allow as much space as possible between the controller and
devices that generate a powerful high-frequency or surge.
Separate the high-voltage or large-current power lines from other
lines, and avoid parallel or common wiring with the power lines
when you are wiring to the terminals.
5. Use this product within the rated load and power supply voltage.
6. Touching the lens with a hard object or applying stress to the lens
may damage the lens and cause the product to malfunction. Do
not touch the lens with a hard object or apply stress to the lens.
7. Never use water, detergents, or organic solvents other than
absolute alcohol.
8. When disassembling the Infrared Thermosensor for disposal, use
suitable tools.
9. The laser pointer uses a semiconductor laser.
Shining the laser for an unnecessarily long time may shorten the
life of the laser and cause product failure.
10.Risk of damage if pressed with excessive force. When connecting
the connector, make sure the orientation is correct and connect
correctly.
11.Do not connect/disconnect the USB cable during regular use.
Doing so may result in malfunction or failure of the product.
ES1-N
8