System Operation; System Alarm - Carax TPMS CRX-1001 Manual

Manual for Tire Pressure Monitoring System, TPMS
Adjust the transmitter sensor angle so that the transmitter
6 fits tightly on the wheel and then tighten the screw for the
transmitter's sensor so that it is fixed on the wheel.
Clean inside the tire to prevent the tire from damaging the
7
transmitter sensor.
Inflate the tires.
Balance the tire
a. Balance tires using a balance machine
b. A lead tire weight may need to be added for balancing.
8 c. Balance until the tire balance shows balance as "OK"
The Steps above will require the assistance of a tire fitting
service or a mechanic. It is important that the wheels are
balanced after the fitting of the TPMS sensors in order to
ensure the safe operation of the tire when refitted to the
vehicle.
9 Set up the other three tires in the same manner.
Turn the ignition key of the vehicle until the power is
activated on the cigar lighter, this may be first or second
position depending on the car manufacturer. The in-car
display will be activated.
10
The function button (
switched to pressure or temperature depending on the
customer's need.
After the system is installed, it will automatically monitor the tire pressure and temperature.
Once the ignition is turned on, and the vehicle is in motion, the display will show the real-time
tire pressure and temperature individually.
The alarm system will start, if tire pressure is too low, and if tire temperature is too high, the
alarm system will start too, and tire pressure will show on display. If high tire temperature and
low tire pressure situation happen at the same time, the system will show low tire pressure at
) of the display unit can be

System Operation

System Alarm

6/21