Table of Contents
Advertisement
Manual for Tire Pressure Monitoring System, TPMS
Tire Over Temperature Warning
Step
After the setting operation of high tire pressure, the system
1
will automatically entry the setting mode of high tire
temperature.
The first shown figure is the tires factory default high
temperature value (80°C) for the tires. The green light
2
indicates the tires factory default (80
light indicator for "C", and the directive character indicator for
"Hi".
Press the function key (
temperature figure.
The high temperature figure set up range is from 60°C to
100°C ( the °F value will add 1 unit; and the unit value will
return to 140°F when it has reached 212°F, the driver can
3
continually push the function key (
appropriate high temperature figure; the factory default
value is 80°C / 176°F.
When the tire temperature exceeds this setting, the system
will generate the warning signals.
Press the set key (
4
setting operation.
Alarm Instruction
Type
The tire pressure of RF Tire
default (26 psi), which shown in red; and
1
warn the driver, press
The tire pressure of RF Tire
default (50 psi), which shown in red; and
2
warn the driver, press
The tire temperature of RF Tire
temperature default (80°C), which shown in red; and
3
an alarm to warn the driver, press
alarm.
The battery voltage of
default
(11v)
4
When display is not in battery monitor mode, the battery
voltage icon will flash to warn the driver.
Operation process
) to change the high
) to complete the high temperature
Warning Description
(22 psi)
set key (
) to turn off the alarm.
(52 psi)
set key (
) to turn off the alarm.
(82°C)
set key (
is below battery voltage
Vehicle
will be shown in red.
o
C / 176°F), the blue
) to adjust the
is below tire pressure
active an alarm to
is above tire pressure
active an alarm to
is above tire
active
) to turn off the
10/21
Photograph
Photograph
Advertisement
Table of Contents
