Mode 3: Front Tires Diagonal Exchanged, And Rear Tires Parallel Changed To Front - Carax TPMS CRX-1001 Manual

Manual for Tire Pressure Monitoring System, TPMS

Mode 3: Front tires diagonal exchanged, and Rear tires parallel changed to Front.

Step
Rotate the front tires diagonally to the rear, and the rear tires
1 parallel to the front. To prevent incorrect positioning, mark
the tires.
Press both the set key (
simultaneously for 5 seconds. The display will flash green
and red, and a "beep" sound will be heard. You can release
the buttons, and the system will have entered into mode 1.
2
Re-press function key (
"beep" then the LED will show "2", re-press the function
key ( ) again, and wait for "beep", you will then see "3",
the system will have entered into mode 3.
3-1
After entering mode 3, the display will show "3"
3-2
LED will flash diagonally for front to rear and parallel rear to
front in red.
3
3-3
The operator only needs to press the set key (
second and listen for the "beep". This means that mode 3
has been chosen and will exchange all four sensors ID
positions and will automatically return the monitoring status
to normal.
Operation process
) and function key (
) for 1 second and wait for
14/21
Photograph
)
) for 3