Table of Contents
Advertisement
3. Clean the Filter:
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt, then rinse it
thoroughly under lukewarm running water (below 104°F). You may use a mild soap and water
solution if needed. Allow the filter to air dry in a cool and shaded place. Dry the filter
thoroughly before reinstalling it.
4. Reinstall the Filter:
Install the filter and then close the panel cover tightly.
Warning:
The filter should be cleaned every three months. If there is a high quantity of dust in the
operation environment, the filter should be cleaned more frequently.
After removing the filter, do not touch the fins in order to avoid injury.
Do not use fire or a hair dryer to dry the filter in order to avoid deforming the filter or causing a
fire hazard.
Checklist After Storage Period
1. Check whether the air inlets and air outlets are blocked.
2. Check whether the circuit breaker, plug, and socket are in good condition.
3. Check whether the filter is clean.
4. Check whether the drainage pipe is damaged.
Checklist Before Storage Period
1. Disconnect the power supply.
2. Clean the filter and the indoor unit's front panel.
Notes on Disposal:
Many of the packaging materials are recyclable. Please dispose of them in an appropriate
recycling container.
If you want to dispose of the air conditioner, please contact your local dealer or service center
for information about the correct disposal method.
41
Advertisement
Table of Contents
