Clock Functions; Using The Accessories - Progress PBP5360 User Manual

CLOCK FUNCTIONS

Clock function
Time of day
Minute Minder
Duration
End
You can use Duration
at the same time to set the time when
the appliance must be activated and
then deactivated. First set Duration
then End .
Setting the clock functions
1. For Duration
oven function and temperature. This is
not necessary for the Minute Minder
. Refer to "Setting an oven function".
2. Press
again and again until the sym-
bol for the necessary clock function
flashes.

USING THE ACCESSORIES

Warning! Refer to "Safety information"
chapter.
Turnspit
A
Warning! Be careful when you use the
turnspit. The forks and the spit are
sharp. There is a risk of injury.
To set, change or check the time of day.
To set a countdown time. This function has no effect on the opera-
tion of the oven.
To set how long the appliance must operate.
To set when the appliance must be deactivated.
and End
2 1
and End , set an
B
C
D
Application
3. Press + or - to set the necessary clock
function.
The display shows the symbol for the
clock function you set. When the set
,
time ends, the symbol flashes and an
acoustic signal sounds for two minutes.
With the Duration
tions, the appliance deactivates auto-
matically.
4. Press a button to stop the signal.
5. Deactivate the appliance.
Cancelling the clock functions
1. Press
again and again until the sym-
bol for the necessary clock function
and flash in the display.
2. Press and hold the button - until the
clock function goes out.
A) Turnspit frame
B) Forks
C) Spit
D) Handle
Warning! Use oven gloves when you
remove the turnspit. The turnspit and
the grill are hot. There is a risk of burns.
progress 29
and End func-