Proactive Protekt Aire 94001 Operation Manual page 6

2. Place pump on a horizontal surface or suspend on the end of bed frame with built-in hanger.
3. Connect pump to hoses extending from the mattress. Ensure air hoses are not kinked and
will not be pinched by any articulated bed mechanisms.
4. Ensure green Power switch is in the OFF position.
5. Plug pump into a properly grounded wall outlet. (Verify power to this outlet is not controlled by
a wall switch).
6. Press Power switch button to the ON position. Air will begin to flow into mattress.
7. Yellow LED indicates low air pressure; green LED indicates proper air pressure has been
reached and mattress is ready for patient placement.
8. Adjust the digital weight setting on the pump to set the airflow for Alternating Therapy.
Ensure control unit hoses are properly connected to mattress for the desired function.
6