SelectBlinds Cordless Honeycomb Shades Installation Manual

Locating the brackets

5cm
The position that you place the outermost brackets must be
5cm away from the end of the rail. Any additional brackets
(supplied for wider blinds) can then be evenly distributed
across the window space. Use a pencil to mark the window
area where the brackets will be positioned.

Fitting the brackets

Use the single hole in the top of the bracket to fix to
the lintel (the 'ceiling' of the recess).

Fitting the blind

P1
The brackets offer two methods of installation:
Top-Fixing
Situate the front lip of the
headrail into the front
hook of the bracket.
Cordless Honeycomb Shades
5cm
Face-Fixing
Use two screws through the back plate to mount
onto a facing surface (a wall or window frame)
Installation Guide
Ensure that the back of the
bracket sits clear of any
protruding items such as
window handles or vents. This
will allow the blind to hang
correctly once installed.
Push the back of the
headrail upwards to
engage the metal clip at
the back of the bracket.