SelectBlinds Roller Shade Installation And Care Instructions

Spring load type

Download this manual

A few simple tools are required:

Measuring tape

Power drill, drill bits

Hex head and/or Phillips driver bit

Pencil

Bracket positions illustrated are for a blind with the control chain on the right. For a blind with the control chain

on the left the brackets should be at the opposite ends. Brackets can be fixed to any flat surface above, behind or to

the side of the blind. They must be level to ensure the smooth operation of the blind. Check that the rolled up fabric

will not touch

any surface. To calculate the spacing between the brackets add 32mm (1 1/4") to the width of the blind fabric. Fix the

brackets so that the outsides of the brackets are this distance apart.

Fitting the Brackets

Hold the blind to the brackets with the fabric hanging from the back of the blind. Fit the spring plunger into its

bracket. Push the blind into this bracket, depressing the plunger. With the locating hook pointing downwards place the

hook into the vertical part of the '+' shaped hole in the bracket. Allow the hook to drop downwards so that it locks into

place in the bracket.

Fitting the Blind

Installation and Care Instructions

Roller Shades Installation instructions

BLINDS WITH SIDE CONTROL CHAIN

Page 1 Installation and Care Instructions Roller Shades Installation instructions A few simple tools are required: Measuring tape Power drill, drill bits Hex head and/or Phillips driver bit Pencil BLINDS WITH SIDE CONTROL CHAIN Bracket positions illustrated are for a blind with the control chain on the right. For a blind with the control chain on the left the brackets should be at the opposite ends.
Page 2 ROLLER SHADES – SPRING LOAD TYPE PIN END RIGHT SIDE SPRING END ALUMINUM ROLLER OR TUBE LEFT SIDE Spring Bracket Pin Bracket Spring end (flat pin) always goes to the left side and the round or pin end to the right side. Brackets to be installed accordingly.
Page 3 Roller shades are covered by a lifetime guarantee on the shade roller against manufactures defects in materials and workmanship as long as the original customer owns them. Our guarantee does not cover abuse misuse or improper installation. Fringes and blinds may fade; this change is not covered under warranty. How To Adjust Tension On Roller On a spring shade the spring may become un-wound during shipping.