Advertisement
Quick Links
Advertisement
Related Manuals for SelectBlinds Custom Woven Natural Shades
Summary of Contents for SelectBlinds Custom Woven Natural Shades
- Page 3 Warning Young children can STRANGLE in cord and bead chain loops. They can also wrap cords around their necks and STRANGLE. • Always keep cords and bead chains out of children’s reach. • Move cribs, playpens, and other furniture away from cords and bead chains. Children can climb furniture to get to cords.
-
Page 5: Tools Required
Tools Required Screwdriver, tape measure, pencil, drill, step ladder Use a 3/32” drill bit to predrill screw holes. Use a ¼” drill bit for wall anchors. InstallatIon InstructIons For roMan stYlE sHaDEs step 1. Check Package Contents Missing part? Call 1-800-264-1190. Mounting hardware kit includes the following: Part Quantity... - Page 6 For Inside Mounting: Place a bracket on both ends of the head rail. (and one or more in the middle of the rail for larger shades). Hold the shade in place and make a pencil mark at the rear of each bracket where it contacts the inside of the window frame.
- Page 7 step 6. Adjust Safety Cord Stops Warning REDUCE RISK OF STRANGULATION TO INFANTS AND TODDLERS. POSITION SAFETY CORD STOPS BEFORE USING BLINDS. Lower shades to maximum desired length and lock into place. Measure the distance from head rail to cord stops. If cord stops are 1 to 6"...
- Page 8 InstallatIon InstructIons For PanEl tracK BlInDs step 1. Check Package Contents Missing part? Call 1-800-264-1190. Mounting hardware kit includes the following: Part Quantity Head Rail Mounting Clips 3 (blinds up to 72” wide) 4 (72" to 108") L Extension Brackets 3 (blinds up to 72”...
- Page 9 steel tape measure to assure accuracy. Make two or more pencil marks at desired height. Hold the rail level using the pencil marks for alignment. Mark the exact location for each bracket with the pencil. Remove the brackets from the head rail and position the top of each bracket at the marked location and screw each bracket into the wall or window molding using the 1”...
- Page 10 Starting with the track at the back of the head rail, attach each panel to a track by sliding the oval eyelets at the top of each panel onto the track hanger hooks (see illustration). step 6. Install the Valance The brackets slide into the hem of the valance as illustrated.
-
Page 11: Replacement Parts
InstallatIon InstructIons For DraPErY PanEls The Woven Natural Drapery is designed to be hung on a decorative rod set. The panel is preassembled (i.e. hooks, clips and rings are pre- attached). Measure carefully! The ordered length of the panel is measured from the top of the rings. -
Page 12: Limited Lifetime Warranty
LIMITED LIfETIME WARRANTY The enclosed product is warranted to the original residential retail purchaser as long as the product remains in the original window. Covered: Lifetime: Entire product against manufacturing defects (i.e. a flaw in the product design, materials, or workmanship that causes the product to no longer function) 3 years: Cords including internal cords such as those found in cordless 5 years: All fabric...