Installation Of Ip Configuration Software - SMC Networks LEC-GEN1 Operation Manual

5. Installation of IP Configuration Software

Follow steps 3 to 6 below to install the IP configuration software.
No.
3.
4.
5.
6.
Display
Start the IP configuration software installer (IPconfig
setup.exe), and then click "Next".
Specify the installation location for the IP configuration
software. To change the installation location, click the
"Change..." button on the display, and specify the new
installation location.
After specifying the new installation location of the IP
configuration software, click "Next".
Press "Install", to start installing the IP configuration
software.
When installation of the IP configuration software is
complete, a message "Installshield Wizard Completed"
will be displayed. Click "Finish" to complete.
* If the installation of the IP configuration software fails to
complete, return to step 3 and retry.
- 7 -
Instructions