Page 2
The Suhr Badger This all-tube amplifier offers a wide range of classic guitar sounds. Driven by a cathode biased EL-84 power section and features a 5Y3GT tube rectifier, the Badger 18 delivers a variety of warm, sparkling cleans and rich, dynamic overdrive tones.
Page 3
ON/OFF: To power up the Badger 18, flip the ON/OFF select switch to the ON position. To power down, simply switch the power switch to the OFF position. Drive: Feeds the input to the power section. With Power at 10 it acts as a...
Page 4
Speaker Outputs: 2 parallel speaker outputs Boost Footswitch: MOSFET Boost feature can be accessed remotely via a standard latching/On/Off style foot switch or control Impedance Selector: Rotate to match the impedance of your ruction device. cabinet. Please note: Connecting this jack to an external switching source will override Badgers Boost Switch located on the front panel.
Page 5
Tubes: The Badger 18, 30 and 35 have slightly different tube compliments (See Page 6) When replacing the rectifier tube, we require you change it with a new 5Y3GT. Using the 5Y3GT will ensure your Badger’s internal voltages operate properly.
Page 6
Included Accessories: Padded Cover Also Available: Matching Suhr 1x12” and 2x12” cabinets with WGS speakers WARRANTY FOR SUHR AMPLIFIERS AND ELECTRONIC PRODUCTS: For warranty information on the Suhr Badger, as well as all other Suhr products, please visit, https://www.suhr.com/warranty/ Rev:091420...
Need help?
Do you have a question about the Badger 18 and is the answer not in the manual?
Questions and answers