Step By Step Treatment - Tens Hi-Dow Instructions & User's Manual

Set up guide
Switch on the remote unit and the white (no1) TENS module.
(Green Light Indicates the unit is on).
Connect either the large lumbar electrode or two pad
electrodes to the module as shown
11
Now firmly place the unit on to the painful site of your body to be treated see
examples shown.
Please start by using

STEP BY STEP TREATMENT

Mode/Programme 1 and c1 as displayed on the remote. Now press the + button
until the sensation is strong but pleasant,
Do not over stimulation by increasing the intensity level which is uncomfortable.
Mode/programme, 1 is the ideal setting for pain block and is recommended as you
start up programme.
It is advised to use this programme for the first 3 to 4 days for a minimum of one
hour per session with 3 to 4 sessions per day. You may increase the length of time
per session if required to block pain as required.
www.thetenscompany.co.uk Telephone: 0800 121 4626